Wi-Fi How To
From Navas Wireless Wiki
(→Two wireless networks on one router: add content) |
(→Two wireless networks on one router: add content) |
||
Line 66: | Line 66: | ||
#** Click ''Enable'' for ''AP Isolation'' | #** Click ''Enable'' for ''AP Isolation'' | ||
#** Click ''Unbridged'' for ''Network Configuration'' | #** Click ''Unbridged'' for ''Network Configuration'' | ||
- | #** For ''IP Address'', enter a '''different''' [w:subnet] from the private network; e.g.<br>'''192.168.2.1''' | + | #** For ''IP Address'', enter a '''different''' [w:subnet] from the private network; e.g.<br>'''192.168.''2''.1''' |
#** For ''Subnet Mask'', enter:<br>'''255.255.255.0''' | #** For ''Subnet Mask'', enter:<br>'''255.255.255.0''' | ||
#* Click ''Save'' (and do '''not''' click ''Apply Settings'') | #* Click ''Save'' (and do '''not''' click ''Apply Settings'') | ||
# '''''Wireless → Wireless Security''''' | # '''''Wireless → Wireless Security''''' | ||
+ | #* Enter desired security for each wireless network | ||
+ | #* '''WPA2 Personal with a strong passphrase is recommended.''' (WEP and WPA-TKIP are '''not''' secure!) | ||
+ | #* ''Note'': DD-WRT v24 preSP2 Beta build 12533 will ''not'' properly authenticate WPA Personal or WPA2 Personal after a reboot ([http://www.dd-wrt.com/dd-wrtv2/bugtracker/view.php?id=3729 bug 003729]), only WEP. | ||
# '''''Services → Services → DNSMasq''''' | # '''''Services → Services → DNSMasq''''' | ||
# '''''Administration → Commands → Command Shell''''' | # '''''Administration → Commands → Command Shell''''' |